StrongGrid is a strongly typed .NET client for SendGrid's v3 API.
Get Started
$ dotnet add package StrongGridReadme
StrongGrid
StrongGrid is a strongly typed .NET client for SendGrid's v3 API.
$ dotnet add package StrongGrid
| Release Notes | NuGet (stable) | MyGet (prerelease) |
|---|---|---|
 |  |  |
StrongGrid is a strongly typed library for SendGrid's v3 API.
It started out in February 2016 as a fork of SendGrid's own library. At the time, the SendGrid C# client for their API extensively used the dynamic type which was very inconvenient and made it very difficult for developers. Furthermore, their C# client only covered the mail end point but did not allow access to other end points in their email marketing API such as creating lists and segments, importing contacts, etc. I submited a pull request to SendGrid in March 2016 but it was not accepted and eventually closed in June 2016.
In October 2016 I decided to release this library as a nuget package since SendGrid's library was still using dynamic and lacking strong typing. As of February 14, 2017 dynamic was removed from SendGrid's official csharp library and support for .Net Standard was added.
StrongGrid includes a client that allows you to interact with all the "resources" in the SendGrid API (e.g.: send an email, manage lists, contacts and segments, search for contacts matching criteria, create API keys, etc.).
StrongGrid also includes a parser for webhook sent from SendGrid to your own WebAPI. This parser supports the two types of webhooks that SendGrid can post to your API: the Event Webhook and the Inbound Parse Webhook.
Since November 2017, StrongGrid also includes a "warmup engine" that allows you to warmup IP addresses using a custom schedule.
If you need information about how to setup the SendGrid webhooks, please consult the following resources:
The easiest way to include StrongGrid in your C# project is by adding the nuget package to your project:
PM> Install-Package StrongGrid
Once you have the StrongGrid library properly referenced in your project, add the following namespace:
using StrongGrid;
StrongGrid supports the 4.8 and 5.0 .NET framework as well as any framework supporting .NET Standard 2.1 (which includes .NET Core 3.x and ASP.NET Core 3.x).
You declare your client variable like so:
var apiKey = "... your api key...";
var strongGridClient = new StrongGrid.Client(apiKey);If you need to use a proxy, you can pass it to the Client:
var apiKey = "... your api key...";
var proxy = new WebProxy("http://myproxy:1234");
var strongGridClient = new StrongGrid.Client(apiKey, proxy);One of the most common scenarios is to send transactional emails.
Here are a few examples:
// Send an email to a single recipient
var messageId = await strongGridClient.Mail.SendToSingleRecipientAsync(to, from, subject, html, text).ConfigureAwait(false);
// Send an email to multiple recipients
var messageId = await strongGridClient.Mail.SendToMultipleRecipientsAsync(new[] { to1, to2, to3 }, from, subject, html, text).ConfigureAwait(false);
// Include attachments when sending an email
var attachments = new[]
{
Attachment.FromLocalFile(@"C:\MyDocuments\MySpreadsheet.xlsx"),
Attachment.FromLocalFile(@"C:\temp\Headshot.jpg")
};
var messageId = await strongGridClient.Mail.SendToSingleRecipientAsync(to, from, subject, html, text, attachments: attachments).ConfigureAwait(false);You have access to numerous 'resources' (such as Contacts, Lists, Segments, Settings, SenderAuthentication, etc) off of the Client and each resource offers several methods to such as retrieve, create, update, delete, etc.
Here are a few example:
// Create a new contact (contacts are sometimes refered to as 'recipients')
var contactId = await strongGridClient.Contacts.CreateAsync(email, firstName, lastName, customFields);
// Send an email
await strongGridClient.Mail.SendToSingleRecipientAsync(to, from, subject, htmlContent, textContent);
// Retreive all the API keys in your account
var apiKeys = await strongGridClient.ApiKeys.GetAllAsync();
// Add an email address to a suppression group
await strongGridClient.Suppressions.AddAddressToUnsubscribeGroupAsync(groupId, "test1@example.com");
// Get statistics between the two specific dates
var globalStats = await strongGridClient.Statistics.GetGlobalStatisticsAsync(startDate, endDate);
// Create a new email template
var template = await strongGridClient.Templates.CreateAsync("My template");In August 2018, SendGrid released a new feature in their API that allows you to use the Handlebars syntax to specify merge fields in your content. Using this powerfull new feature in StrongGrid is very easy.
First, you must specify TemplateType.Dynamic when creating a new template like in this example:
var dynamicTemplate = await strongGridClient.Templates.CreateAsync("My dynamic template", TemplateType.Dynamic).ConfigureAwait(false);Second, you create a version of your content where you use the Handlebars syntax to define the merge fields and you can also specify an optional "test data" that will be used by the SendGrid UI to show you a sample. Rest assured that this test data will never be sent to any recipient. The following code sample demonstrates creating a dynamic template version containing simple substitution for CreditBalance, deep object replacements for Customer.first_name and Customer.last_name and an iterator that displays information about multiple orders.
var subject = "Dear {{Customer.first_name}}";
var htmlContent = @"
<html>
<body>
Hello {{Customer.first_name}} {{Customer.last_name}}.
You have a credit balance of {{CreditBalance}}<br/>
<ol>
{{#each Orders}}
<li>You ordered: {{this.item}} on: {{this.date}}</li>
{{/each}}
</ol>
</body>
</html>";
var textContent = "... this is the text content ...";
var testData = new
{
Customer = new
{
first_name = "aaa",
last_name = "aaa"
},
CreditBalance = 99.88,
Orders = new[]
{
new { item = "item1", date = "1/1/2018" },
new { item = "item2", date = "1/2/2018" },
new { item = "item3", date = "1/3/2018" }
}
};
await strongGridClient.Templates.CreateVersionAsync(dynamicTemplate.Id, "Version 1", subject, htmlContent, textContent, true, EditorType.Code, testData).ConfigureAwait(false);Finally, you can send an email to a recipient and specify the dynamic data that applies to them like so:
var dynamicData = new
{
Customer = new
{
first_name = "Bob",
last_name = "Smith"
},
CreditBalance = 56.78,
Orders = new[]
{
new { item = "shoes", date = "2/1/2018" },
new { item = "hat", date = "1/4/2018" }
}
};
var to = new MailAddress("bobsmith@hotmail.com", "Bob Smith");
var from = new MailAddress("test@example.com", "John Smith");
var messageId = await strongGridClient.Mail.SendToSingleRecipientAsync(to, from, dynamicTemplate.Id, dynamicData).ConfigureAwait(false);Here's a basic example of an API controller which parses the webhook from SendGrid into an array of Events:
namespace WebApplication1.Controllers
{
[Route("api/SendGridWebhooks")]
public class SendGridController : Controller
{
[HttpPost]
[Route("Events")]
public async Task<IActionResult> ReceiveEvents()
{
var parser = new WebhookParser();
var events = await parser.ParseWebhookEventsAsync(Request.Body).ConfigureAwait(false);
... do something with the events ...
return Ok();
}
}
}Here's a basic example of an API controller which parses the webhook from SendGrid into an InboundEmail:
namespace WebApplication1.Controllers
{
[Route("api/SendGridWebhooks")]
public class SendGridController : Controller
{
[HttpPost]
[Route("InboundEmail")]
public async Task<IActionResult> ReceiveInboundEmail()
{
var parser = new WebhookParser();
var inboundEmail = await parser.ParseInboundEmailWebhookAsync(Request.Body).ConfigureAwait(false);
... do something with the inbound email ...
return Ok();
}
}
}SendGrid has a feature called Signed Event Webhook Requests which you can enable under Settings > Mail Settings > Event Settings when logged in your SendGrid account. When this feature is enabled, SendGrid includes additional information with each webhook that allow you to verify that this webhook indeed originated from SendGrid and therefore can be trusted. Specifically, the webhook will include a "signature" and a "timestamp" and you must use these two value along with a public key that SendGrid generated when you enabled the feature to validate the data being submited to you. Please note that SendGrid sometimes refers to this value as a "verification key". In case you are curious and want to know more about the inticacies of validating the data, I invite you to read SendGrid's documentation on this topic.
However, if you want to avoid learning how to perform the validation and you simply want this validation to be conveniently performed for you, StrongGrid can help! The WebhookParser class has a method called ParseSignedEventsWebhookAsyncwhich will automatically validate the data and throw a security exception if validation fails. If the validation fails, you should consider the webhook data to be invalid. Here's how it works:
namespace WebApplication1.Controllers
{
[Route("api/SendGridWebhooks")]
public class SendGridController : Controller
{
[HttpPost]
[Route("InboundEmail")]
public IActionResult ReceiveInboundEmail()
{
// Get your public key
var apiKey = "... your api key...";
var strongGridClient = new StrongGrid.Client(apiKey);
var publicKey = await strongGridClient.WebhookSettings.GetSignedEventsPublicKeyAsync().ConfigureAwait(false);
// Get the signature and the timestamp from the request headers
var signature = Request.Headers[WebhookParser.SIGNATURE_HEADER_NAME]; // SIGNATURE_HEADER_NAME is a convenient constant provided so you don't have to remember the name of the header
var timestamp = Request.Headers[WebhookParser.TIMESTAMP_HEADER_NAME]; // TIMESTAMP_HEADER_NAME is a convenient constant provided so you don't have to remember the name of the header
// Parse the events. The signature will be automatically validated and a security exception thrown if unable to validate
try
{
var parser = new WebhookParser();
var events = await parser.ParseSignedEventsWebhookAsync(Request.Body, publicKey, signature, timestamp).ConfigureAwait(false);
... do something with the events ...
}
catch (SecurityException e)
{
... unable to validate the data ...
}
return Ok();
}
}
}SendGrid already provides a way to warm up ip addresses but you have no control over this process. StrongGrid solves this issue by providing you a warmup engine that you can tailor to your needs.
// Prepare the warmup engine
var poolName = "warmup_pool";
var dailyVolumePerIpAddress = new[] { 50, 100, 500, 1000 };
var resetDays = 1; // Should be 1 if you send on a daily basis, should be 2 if you send every other day, should be 7 if you send on a weekly basis, etc.
var warmupSettings = new WarmupSettings(poolName, dailyVolumePerIpAddress, resetDays);
var warmupEngine = new WarmupEngine(warmupSettings, client);
// This is a one-time call to create the IP pool that will be used to warmup the IP addresses
var ipAddresses = new[] { "168.245.123.132", "168.245.123.133" };
await warmupEngine.PrepareWithExistingIpAddressesAsync(ipAddresses, CancellationToken.None).ConfigureAwait(false);
// Send emails using any of the following methods
var result = warmupEngine.SendToSingleRecipientAsync(...);
var result = warmupEngine.SendToMultipleRecipientsAsync(...);
var result = warmupEngine.SendAsync(...);The Send... methods return a WarmupResult object that will tell you whether the process is completed or not, and will also give you the messageId of the email sent using the IP pool (if applicable) and the messageId of the email sent using the default IP address (which is not being warmed up).
The WarmupEngine will send emails using the IP pool until the daily volume limit is achieved and any remaining email will be sent using the default IP address.
As you get close to your daily limit, it's possible that the Warmup engine may have to split a given "send" into two messages: one of which is sent using the ip pool and the other one sent using the default ip address.
Let's use an example to illustrate: let's say that you have 15 emails left before you reach your daily warmup limit and you try to send an email to 20 recipients. In this scenario the first 15 emails will be sent using the warmup ip pool and the remaining 5 emails will be sent using the default ip address.
Recommended daily volume: If you are unsure what daily limits to use, SendGrid has provided a recommended schedule and StrongGrid provides a convenient method to use the recommended schedule tailored to the number of emails you expect to send in a typical day. All you have to do is come up with a rough estimate of your daily volume and StrongGrid can configure the appropriate warmup settings. Here's an example:
var poolName = "warmup_pool";
var estimatedDailyVolume = 50000; // Should be your best guess: how many emails you will be sending in a typical day
var resetDays = 1; // Should be 1 if you send on a daily basis, should be 2 if you send every other day, should be 7 if you send on a weekly basis, etc.
var warmupSettings = WarmupSettings.FromSendGridRecomendedSettings(poolName, estimatedDailyVolume, resetDays);Progress repository: By default StrongGrid's WarmupEngine will write progress information in a file on your computer's temp folder but you can override this settings.
You can change the folder where this file is saved but you can also decide to use a completely different repository. Out of the box, StrongGrid provides FileSystemWarmupProgressRepository and MemoryWarmupProgressRepository.
It also provides an interface called IWarmupProgressRepository which allows you to write your own implementation to save the progress data to a location more suitable to you such as a database, Azure, AWS, etc.
Please note that MemoryWarmupProgressRepository in intended to be used for testing and we don't recommend using it in production. The main reason for this recommendation is that the data is stored in memory and it's lost when your computer is restarted.
This means that your warmup process would start all over from day 1 each time you computer is rebooted.
// You select one of the following repositories available out of the box:
var warmupProgressRepository = new MemoryWarmupProgressRepository();
var warmupProgressRepository = new FileSystemWarmupProgressRepository();
var warmupProgressRepository = new FileSystemWarmupProgressRepository(@"C:\temp\myfolder\");
var warmupEngine = new WarmupEngine(warmupSettings, client, warmupProgressRepository);Purchase new IP Addresses: You can purchase new IP addresses using SendGrid' UI, but StrongGrid's WarmupEngine makes it even easier.
Rather than invoking PrepareWithExistingIpAddressesAsync (as demonstrated previously), you can invoke PrepareWithNewIpAddressesAsync and StrongGrid will take care of adding new ip addresses to your account and add them to a new IP pool ready for warmup.
As a reminder, please note that the PrepareWithExistingIpAddressesAsync and PrepareWithNewIpAddressesAsync should only be invoked once.
Invoking either method a second time would result in an exception due to the fact that the IP pool has already been created.
var howManyAddresses = 2; // How many ip addresses do you want to purchase?
var subusers = new[] { "your_subuser" }; // The subusers you authorize to send emails on the new ip addresses
await warmupEngine.PrepareWithNewIpAddressesAsync(howManyAddresses, subusers, CancellationToken.None).ConfigureAwait(false);End of warmup process: When the process is completed, the IP pool is deleted and the warmed up IP address(es) are returned to the default pool. You can subsequently invoke the strongGridClient.Mail.SendAsync(...) method to send your emails.
