Name: ModbusRx
Author: Chris Pulman

ModbusRx v1.1.1 — nugetz

dotnet add package ModbusRx

Install-Package ModbusRx

using ModbusRx.Device;
using CP.IO.Ports;

// Create a TCP master
var client = new TcpClientRx("192.168.1.100", 502);
using var master = ModbusIpMaster.CreateIp(client);

// Read holding registers (Function Code 03)
var registers = await master.ReadHoldingRegistersAsync(
    slaveAddress: 1, 
    startAddress: 0, 
    numberOfPoints: 10);

Console.WriteLine($"Read {registers.Length} registers: [{string.Join(", ", registers)}]");

// Write a single register (Function Code 06)  
await master.WriteSingleRegisterAsync(
    slaveAddress: 1, 
    registerAddress: 0, 
    value: 12345);

// Write multiple registers (Function Code 16)
var dataToWrite = new ushort[] { 100, 200, 300, 400, 500 };
await master.WriteMultipleRegistersAsync(
    slaveAddress: 1, 
    startAddress: 10, 
    data: dataToWrite);

using ModbusRx.Device;
using CP.IO.Ports;

try
{
    var client = new TcpClientRx("192.168.1.100", 502)
    {
        ReadTimeout = 5000,   // 5 second timeout
        WriteTimeout = 5000
    };
    
    using var master = ModbusIpMaster.CreateIp(client);
    
    // Configure transport settings
    master.Transport!.ReadTimeout = 5000;
    master.Transport.Retries = 3;
    master.Transport.WaitToRetryMilliseconds = 1000;
    
    // Read all data types
    var coils = await master.ReadCoilsAsync(1, 0, 16);
    var discreteInputs = await master.ReadInputsAsync(1, 0, 16);
    var holdingRegisters = await master.ReadHoldingRegistersAsync(1, 0, 10);
    var inputRegisters = await master.ReadInputRegistersAsync(1, 0, 10);
    
    Console.WriteLine($"Coils: {string.Join("", coils.Select(c => c ? "1" : "0"))}");
    Console.WriteLine($"Discrete Inputs: {string.Join("", discreteInputs.Select(d => d ? "1" : "0"))}");
    Console.WriteLine($"Holding Registers: [{string.Join(", ", holdingRegisters)}]");
    Console.WriteLine($"Input Registers: [{string.Join(", ", inputRegisters)}]");
}
catch (ModbusException ex)
{
    Console.WriteLine($"Modbus Error: {ex.Message}");
}
catch (TimeoutException ex)
{
    Console.WriteLine($"Timeout Error: {ex.Message}");
}
catch (Exception ex)
{
    Console.WriteLine($"General Error: {ex.Message}");
}

using ModbusRx.Reactive;
using System.Reactive.Linq;

// Create a reactive TCP master with automatic connection management
var masterStream = Create.TcpIpMaster("192.168.1.100", 502);

// Continuously read holding registers with error handling
var subscription = masterStream
    .ReadHoldingRegisters(startAddress: 0, numberOfPoints: 10, interval: 1000)
    .Retry(3) // Retry up to 3 times on errors
    .Subscribe(
        result => 
        {
            if (result.error == null)
            {
                Console.WriteLine($"Registers: [{string.Join(", ", result.data)}]");
            }
            else
            {
                Console.WriteLine($"Error: {result.error.Message}");
            }
        },
        error => Console.WriteLine($"Fatal error: {error.Message}"));

// Let it run for 30 seconds
await Task.Delay(30000);

// Clean up
subscription.Dispose();

using ModbusRx.Device;
using CP.IO.Ports;
using System.Net;

// Create UDP master
var client = new UdpClientRx();
var endPoint = new IPEndPoint(IPAddress.Parse("192.168.1.100"), 502);
client.Connect(endPoint);

using var master = ModbusIpMaster.CreateIp(client);

// UDP operations are similar to TCP
var registers = await master.ReadHoldingRegistersAsync(1, 0, 10);
Console.WriteLine($"UDP Read: [{string.Join(", ", registers)}]");

// Write coils (Function Code 15)
var coilData = new bool[] { true, false, true, true, false, false, true, false };
await master.WriteMultipleCoilsAsync(1, 0, coilData);

using CP.IO.Ports;
using ModbusRx.Device;
using System.IO.Ports;

// Configure serial port
using var port = new SerialPortRx("COM1")
{
    BaudRate = 9600,
    DataBits = 8,
    Parity = Parity.None,
    StopBits = StopBits.One,
    Handshake = Handshake.None
};

await port.OpenAsync();

// Create RTU master
using var master = ModbusSerialMaster.CreateRtu(port);

try
{
    // Read coils
    var coils = await master.ReadCoilsAsync(
        slaveAddress: 1, 
        startAddress: 0, 
        numberOfPoints: 16);
    
    Console.WriteLine($"Coils: {string.Join("", coils.Select(c => c ? "1" : "0"))}");
    
    // Read/Write multiple registers (Function Code 23)
    var writeData = new ushort[] { 1000, 2000, 3000 };
    var readData = await master.ReadWriteMultipleRegistersAsync(
        slaveAddress: 1,
        startReadAddress: 0,
        numberOfPointsToRead: 5,
        startWriteAddress: 10,
        writeData: writeData);
    
    Console.WriteLine($"Read/Write Result: [{string.Join(", ", readData)}]");
}
finally
{
    await port.CloseAsync();
}

using CP.IO.Ports;
using ModbusRx.Device;
using System.IO.Ports;

// Configure serial port for ASCII
using var port = new SerialPortRx("COM2")
{
    BaudRate = 9600,
    DataBits = 7,           // ASCII typically uses 7 data bits
    Parity = Parity.Even,   // ASCII typically uses even parity
    StopBits = StopBits.One
};

await port.OpenAsync();

// Create ASCII master
using var master = ModbusSerialMaster.CreateAscii(port);

// ASCII operations are identical to RTU in terms of function calls
var registers = await master.ReadHoldingRegistersAsync(1, 0, 10);
Console.WriteLine($"ASCII Read: [{string.Join(", ", registers)}]");

using ModbusRx.Device;
using ModbusRx.Data;

// Create and configure a server
using var server = new ModbusServer();

// Start multiple protocol endpoints
var tcpSubscription = server.StartTcpServer(502, unitId: 1);
var udpSubscription = server.StartUdpServer(503, unitId: 1);

// Enable simulation mode for testing
server.SimulationMode = true;

// Start the server
server.Start();

// Load initial test data
server.LoadSimulationData(
    holdingRegisters: new ushort[] { 1, 2, 3, 4, 5, 100, 200, 300, 400, 500 },
    inputRegisters: new ushort[] { 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 },
    coils: new bool[] { true, false, true, false, true, false, true, false },
    inputs: new bool[] { false, true, false, true, false, true, false, true }
);

Console.WriteLine("Server running on TCP:502 and UDP:503");
Console.WriteLine("Press any key to stop...");
Console.ReadKey();

// Cleanup
server.Stop();
tcpSubscription.Dispose();
udpSubscription.Dispose();

using ModbusRx.Device;
using ModbusRx.Data;
using System.Net.Sockets;

// Create TCP listener
var tcpListener = new TcpListener(IPAddress.Any, 502);

// Create TCP slave
using var slave = ModbusTcpSlave.CreateTcp(unitId: 1, tcpListener);

// Configure custom data store
slave.DataStore = DataStoreFactory.CreateDefaultDataStore();

// Load test data
for (ushort i = 1; i <= 100; i++)
{
    slave.DataStore.HoldingRegisters[i] = (ushort)(i * 10);
    slave.DataStore.InputRegisters[i] = (ushort)(i * 5);
    slave.DataStore.CoilDiscretes[i] = (i % 2) == 0;
    slave.DataStore.InputDiscretes[i] = (i % 3) == 0;
}

// Start listening
var listenTask = Task.Run(async () => await slave.ListenAsync());

Console.WriteLine("TCP Slave listening on port 502...");
Console.WriteLine("Press any key to stop...");
Console.ReadKey();

// Stop the slave
slave.Dispose();

using ModbusRx.Device;
using CP.IO.Ports;

// Create UDP client for listening
var udpClient = new UdpClientRx(502);

// Create UDP slave
using var slave = ModbusUdpSlave.CreateUdp(unitId: 1, udpClient);

// Start listening
var listenTask = Task.Run(async () => await slave.ListenAsync());

Console.WriteLine("UDP Slave listening on port 502...");
Console.WriteLine("Press any key to stop...");
Console.ReadKey();

using ModbusRx.Device;
using CP.IO.Ports;
using System.IO.Ports;

// Configure serial port
using var port = new SerialPortRx("COM1")
{
    BaudRate = 9600,
    DataBits = 8,
    Parity = Parity.None,
    StopBits = StopBits.One
};

await port.OpenAsync();

// Create RTU slave
using var slave = ModbusSerialSlave.CreateRtu(unitId: 1, port);

// Start listening
var listenTask = Task.Run(async () => await slave.ListenAsync());

Console.WriteLine("RTU Slave listening on COM1...");
Console.WriteLine("Press any key to stop...");
Console.ReadKey();

using ModbusRx.Reactive;

// Read registers and convert to float
var registers = await master.ReadHoldingRegistersAsync(1, 0, 2);
var floatValue = registers.ToFloat(0); // Convert registers at index 0-1 to float
Console.WriteLine($"Float value: {floatValue}");

// Read registers and convert to double
var doubleRegisters = await master.ReadHoldingRegistersAsync(1, 0, 4);
var doubleValue = doubleRegisters.ToDouble(0); // Convert registers at index 0-3 to double
Console.WriteLine($"Double value: {doubleValue}");

// Convert values back to registers for writing
var outputRegisters = new ushort[2];
123.45f.FromFloat(outputRegisters, 0);
await master.WriteMultipleRegistersAsync(1, 0, outputRegisters);

var outputDoubleRegisters = new ushort[4];
987.654321.FromDouble(outputDoubleRegisters, 0);
await master.WriteMultipleRegistersAsync(1, 10, outputDoubleRegisters);

// Using spans for high-performance operations
var registerSpan = registers.AsSpan();
var floatFromSpan = registerSpan.ToFloat(0);
var doubleFromSpan = registerSpan.ToDouble(2);

var outputSpan = outputRegisters.AsSpan();
456.78f.FromFloat(outputSpan, 0);

// Handle different byte/word ordering conventions
var registers = await master.ReadHoldingRegistersAsync(1, 0, 4);

// Standard word order (high word first)
var floatStandard = registers.ToFloat(0, swapWords: false);

// Swapped word order (low word first) - common with some PLCs
var floatSwapped = registers.ToFloat(0, swapWords: true);

Console.WriteLine($"Standard: {floatStandard}, Swapped: {floatSwapped}");

// Same applies to double values
var doubleStandard = registers.ToDouble(0, swapWords: false);
var doubleSwapped = registers.ToDouble(0, swapWords: true);

using ModbusRx.Reactive;
using System.Reactive.Linq;

// Create a server and observe data changes
using var server = new ModbusServer();
server.SimulationMode = true;
server.Start();

// Observe all data changes
var allDataSubscription = server.ObserveDataChanges(interval: 100)
    .Subscribe(data =>
    {
        Console.WriteLine($"Holding Registers: [{string.Join(", ", data.holdingRegisters.Take(5))}]");
        Console.WriteLine($"Coils: {string.Join("", data.coils.Take(8).Select(c => c ? "1" : "0"))}");
    });

// Observe specific holding registers with change detection
var holdingRegSubscription = server.ObserveHoldingRegisters(
        startAddress: 0, 
        count: 10, 
        interval: 100)
    .Subscribe(registers =>
    {
        Console.WriteLine($"Holding registers changed: [{string.Join(", ", registers)}]");
    });

// Observe coil changes
var coilSubscription = server.ObserveCoils(
        startAddress: 0, 
        count: 8, 
        interval: 100)
    .Subscribe(coils =>
    {
        Console.WriteLine($"Coils changed: {string.Join("", coils.Select(c => c ? "1" : "0"))}");
    });

// Observe input registers
var inputRegSubscription = server.ObserveInputRegisters(
        startAddress: 0,
        count: 5,
        interval: 200)
    .Subscribe(registers =>
    {
        Console.WriteLine($"Input registers: [{string.Join(", ", registers)}]");
    });

// Let it run
await Task.Delay(10000);

// Cleanup
allDataSubscription.Dispose();
holdingRegSubscription.Dispose();
coilSubscription.Dispose();
inputRegSubscription.Dispose();

using ModbusRx.Reactive;

// Create a reactive server that automatically manages lifecycle
var serverSubscription = ModbusServerExtensions.CreateReactiveServer(server =>
{
    // Configure the server
    server.StartTcpServer(502, 1);
    server.StartUdpServer(503, 1);
    server.SimulationMode = true;
    
    // Load initial data
    server.LoadSimulationData(
        holdingRegisters: Enumerable.Range(1, 100).Select(i => (ushort)(i * 10)).ToArray(),
        coils: Enumerable.Range(0, 50).Select(i => i % 2 == 0).ToArray()
    );
})
.Subscribe(
    server => Console.WriteLine("Server started and configured"),
    error => Console.WriteLine($"Server error: {error.Message}"),
    () => Console.WriteLine("Server stopped")
);

// Server runs automatically while subscribed
await Task.Delay(30000);

// Dispose to stop server
serverSubscription.Dispose();

using ModbusRx.Reactive;
using System.Reactive.Linq;

// Create reactive master streams
var tcpMasterStream = Create.TcpIpMaster("192.168.1.100", 502);
var udpMasterStream = Create.UdpIpMaster("192.168.1.101", 502);

// Combine multiple data sources
var combinedData = Observable.CombineLatest(
    tcpMasterStream.ReadHoldingRegisters(0, 10, 1000),
    udpMasterStream.ReadHoldingRegisters(0, 10, 1000),
    (tcpData, udpData) => new { TCP = tcpData.data, UDP = udpData.data })
.Subscribe(combined =>
{
    if (combined.TCP != null && combined.UDP != null)
    {
        Console.WriteLine($"TCP: [{string.Join(", ", combined.TCP)}]");
        Console.WriteLine($"UDP: [{string.Join(", ", combined.UDP)}]");
    }
});

// Read different data types reactively
var multiDataSubscription = tcpMasterStream
    .ReadHoldingRegisters(0, 5, 1000)
    .CombineLatest(
        tcpMasterStream.ReadCoils(0, 8, 1000),
        tcpMasterStream.ReadInputs(0, 8, 1000),
        (registers, coils, inputs) => new { Registers = registers.data, Coils = coils.data, Inputs = inputs.data })
    .Where(data => data.Registers != null && data.Coils != null && data.Inputs != null)
    .Subscribe(data =>
    {
        Console.WriteLine($"Registers: [{string.Join(", ", data.Registers!)}]");
        Console.WriteLine($"Coils: {string.Join("", data.Coils!.Select(c => c ? "1" : "0"))}");
        Console.WriteLine($"Inputs: {string.Join("", data.Inputs!.Select(i => i ? "1" : "0"))}");
    });

await Task.Delay(30000);

// Cleanup
combinedData.Dispose();
multiDataSubscription.Dispose();

using ModbusRx.Data;

// Create simulation data provider
using var simulator = new SimulationDataProvider();
var dataStore = DataStoreFactory.CreateDefaultDataStore();

// Generate different wave patterns
var sineWave = SimulationDataProvider.GenerateSineWave(
    length: 100, 
    amplitude: 32767, 
    frequency: 1.0, 
    phase: 0.0);

var squareWave = SimulationDataProvider.GenerateSquareWave(
    length: 100, 
    highValue: 65535, 
    lowValue: 0, 
    dutyCycle: 0.3);

var sawtoothWave = SimulationDataProvider.GenerateSawtoothWave(
    length: 100, 
    maxValue: 1000, 
    minValue: 0);

var randomData = simulator.GenerateRandomData(
    length: 100, 
    minValue: 0, 
    maxValue: 1000);

Console.WriteLine($"Sine Wave (first 5): [{string.Join(", ", sineWave.Take(5))}]");
Console.WriteLine($"Square Wave (first 5): [{string.Join(", ", squareWave.Take(5))}]");
Console.WriteLine($"Sawtooth Wave (first 5): [{string.Join(", ", sawtoothWave.Take(5))}]");
Console.WriteLine($"Random Data (first 5): [{string.Join(", ", randomData.Take(5))}]");

// Generate boolean patterns for discrete values
var boolPatterns = new[]
{
    simulator.GenerateBooleanPattern(8, BooleanPattern.AllTrue),
    simulator.GenerateBooleanPattern(8, BooleanPattern.AllFalse),
    simulator.GenerateBooleanPattern(8, BooleanPattern.Alternating),
    simulator.GenerateBooleanPattern(8, BooleanPattern.Random)
};

Console.WriteLine("Boolean Patterns:");
Console.WriteLine($"All True: {string.Join("", boolPatterns[0].Select(b => b ? "1" : "0"))}");
Console.WriteLine($"All False: {string.Join("", boolPatterns[1].Select(b => b ? "1" : "0"))}");
Console.WriteLine($"Alternating: {string.Join("", boolPatterns[2].Select(b => b ? "1" : "0"))}");
Console.WriteLine($"Random: {string.Join("", boolPatterns[3].Select(b => b ? "1" : "0"))}");

using ModbusRx.Data;

using var simulator = new SimulationDataProvider();
var dataStore = DataStoreFactory.CreateDefaultDataStore();

// Load different test patterns
var patterns = new[]
{
    TestPattern.CountingUp,
    TestPattern.CountingDown,
    TestPattern.SineWave,
    TestPattern.SquareWave,
    TestPattern.Random,
    TestPattern.AllZeros,
    TestPattern.AllOnes
};

foreach (var pattern in patterns)
{
    simulator.LoadTestPattern(dataStore, pattern);
    
    // Get first 5 values to see the pattern
    var holdingRegs = dataStore.HoldingRegisters.Skip(1).Take(5).ToArray();
    var coils = dataStore.CoilDiscretes.Skip(1).Take(8).ToArray();
    
    Console.WriteLine($"{pattern}:");
    Console.WriteLine($"  Holding Registers: [{string.Join(", ", holdingRegs)}]");
    Console.WriteLine($"  Coils: {string.Join("", coils.Select(c => c ? "1" : "0"))}");
}

using ModbusRx.Data;

// Create a server with dynamic simulation
using var server = new ModbusServer();
using var simulator = new SimulationDataProvider();

// Start server
server.StartTcpServer(502, 1);
server.Start();

// Start different simulation types
Console.WriteLine("Starting Random simulation...");
simulator.Start(server.DataStore!, TimeSpan.FromMilliseconds(500), SimulationType.Random);

await Task.Delay(5000);

Console.WriteLine("Switching to Counting Up...");
simulator.Stop();
simulator.Start(server.DataStore!, TimeSpan.FromMilliseconds(200), SimulationType.CountingUp);

await Task.Delay(5000);

Console.WriteLine("Switching to Sine Wave...");
simulator.Stop();
simulator.Start(server.DataStore!, TimeSpan.FromMilliseconds(100), SimulationType.SineWave);

await Task.Delay(5000);

simulator.Stop();
Console.WriteLine("Simulation stopped.");

using ModbusRx.Device;
using ModbusRx.Reactive;
using System.Reactive.Linq;

// Create master with comprehensive error handling
async Task<bool> SafeModbusOperation()
{
    try
    {
        var client = new TcpClientRx("192.168.1.100", 502);
        using var master = ModbusIpMaster.CreateIp(client);
        
        var registers = await master.ReadHoldingRegistersAsync(1, 0, 10);
        Console.WriteLine($"Success: [{string.Join(", ", registers)}]");
        return true;
    }
    catch (SlaveException ex)
    {
        Console.WriteLine($"Slave Exception - Function Code: {ex.FunctionCode}, Slave Code: {ex.SlaveExceptionCode}");
        return false;
    }
    catch (InvalidModbusRequestException ex)
    {
        Console.WriteLine($"Invalid Request: {ex.Message}");
        return false;
    }
    catch (ModbusCommunicationException ex)
    {
        Console.WriteLine($"Communication Error: {ex.Message}");
        return false;
    }
    catch (TimeoutException ex)
    {
        Console.WriteLine($"Timeout: {ex.Message}");
        return false;
    }
    catch (Exception ex)
    {
        Console.WriteLine($"Unexpected Error: {ex.Message}");
        return false;
    }
}

// Use reactive error handling with retry
var masterStream = Create.TcpIpMaster("192.168.1.100", 502);

var resilientRead = masterStream
    .ReadHoldingRegisters(0, 10, 1000)
    .Retry(3) // Retry up to 3 times
    .Catch<(ushort[]? data, Exception? error), Exception>(ex =>
    {
        Console.WriteLine($"All retries failed: {ex.Message}");
        return Observable.Return<(ushort[]? data, Exception? error)>((null, ex));
    })
    .Subscribe(result =>
    {
        if (result.error == null && result.data != null)
        {
            Console.WriteLine($"Data: [{string.Join(", ", result.data)}]");
        }
        else
        {
            Console.WriteLine($"Final error: {result.error?.Message}");
        }
    });

await Task.Delay(30000);
resilientRead.Dispose();

using ModbusRx.Reactive;
using System.Reactive.Linq;

// Monitor connection health
var masterStream = Create.TcpIpMaster("192.168.1.100", 502);

var healthMonitor = masterStream
    .Select(status => new
    {
        Timestamp = DateTime.Now,
        Connected = status.connected,
        Error = status.error?.Message,
        Master = status.master != null ? "Available" : "Not Available"
    })
    .DistinctUntilChanged(h => h.Connected)
    .Subscribe(health =>
    {
        Console.WriteLine($"[{health.Timestamp:HH:mm:ss}] Connection: {(health.Connected ? "UP" : "DOWN")} - {health.Error ?? "OK"}");
    });

// Read data only when connected
var dataReader = masterStream
    .Where(status => status.connected && status.master != null)
    .SelectMany(status => status.master!.ReadHoldingRegistersAsync(1, 0, 5)
        .ToObservable()
        .Catch<ushort[], Exception>(ex => 
        {
            Console.WriteLine($"Read error: {ex.Message}");
            return Observable.Empty<ushort[]>();
        }))
    .Subscribe(data => Console.WriteLine($"Data: [{string.Join(", ", data)}]"));

await Task.Delay(60000);

healthMonitor.Dispose();
dataReader.Dispose();

Function Code	Description	Master Support	Slave Support	Example Usage
01	Read Coils	✅	✅	`master.ReadCoilsAsync(1, 0, 16)`
02	Read Discrete Inputs	✅	✅	`master.ReadInputsAsync(1, 0, 16)`
03	Read Holding Registers	✅	✅	`master.ReadHoldingRegistersAsync(1, 0, 10)`
04	Read Input Registers	✅	✅	`master.ReadInputRegistersAsync(1, 0, 10)`
05	Write Single Coil	✅	✅	`master.WriteSingleCoilAsync(1, 0, true)`
06	Write Single Register	✅	✅	`master.WriteSingleRegisterAsync(1, 0, 12345)`
15	Write Multiple Coils	✅	✅	`master.WriteMultipleCoilsAsync(1, 0, coilArray)`
16	Write Multiple Registers	✅	✅	`master.WriteMultipleRegistersAsync(1, 0, regArray)`
23	Read/Write Multiple Registers	✅	✅	`master.ReadWriteMultipleRegistersAsync(...)`

Data Type	Address Range	Max Read/Write	Storage Type
Coils	1-65536	2000 per request	`bool[]`
Discrete Inputs	1-65536	2000 per request	`bool[]`
Holding Registers	1-65536	125 per request	`ushort[]`
Input Registers	1-65536	125 per request	`ushort[]`

using ModbusRx.Device;
using CP.IO.Ports;

var client = new TcpClientRx("192.168.1.100", 502);
using var master = ModbusIpMaster.CreateIp(client);

// Function Code 01: Read Coils
var coils = await master.ReadCoilsAsync(
    slaveAddress: 1, 
    startAddress: 0, 
    numberOfPoints: 16);
Console.WriteLine($"FC01 - Coils: {string.Join("", coils.Select(c => c ? "1" : "0"))}");

// Function Code 02: Read Discrete Inputs  
var discreteInputs = await master.ReadInputsAsync(
    slaveAddress: 1,
    startAddress: 0,
    numberOfPoints: 16);
Console.WriteLine($"FC02 - Discrete Inputs: {string.Join("", discreteInputs.Select(d => d ? "1" : "0"))}");

// Function Code 03: Read Holding Registers
var holdingRegisters = await master.ReadHoldingRegistersAsync(
    slaveAddress: 1,
    startAddress: 0,
    numberOfPoints: 10);
Console.WriteLine($"FC03 - Holding Registers: [{string.Join(", ", holdingRegisters)}]");

// Function Code 04: Read Input Registers
var inputRegisters = await master.ReadInputRegistersAsync(
    slaveAddress: 1,
    startAddress: 0,
    numberOfPoints: 10);
Console.WriteLine($"FC04 - Input Registers: [{string.Join(", ", inputRegisters)}]");

// Function Code 05: Write Single Coil
await master.WriteSingleCoilAsync(
    slaveAddress: 1,
    coilAddress: 0,
    value: true);
Console.WriteLine("FC05 - Single coil written");

// Function Code 06: Write Single Register
await master.WriteSingleRegisterAsync(
    slaveAddress: 1,
    registerAddress: 0,
    value: 12345);
Console.WriteLine("FC06 - Single register written");

// Function Code 15: Write Multiple Coils
var coilsToWrite = new bool[] { true, false, true, true, false, false, true, false };
await master.WriteMultipleCoilsAsync(
    slaveAddress: 1,
    startAddress: 10,
    data: coilsToWrite);
Console.WriteLine("FC15 - Multiple coils written");

// Function Code 16: Write Multiple Registers
var registersToWrite = new ushort[] { 1000, 2000, 3000, 4000, 5000 };
await master.WriteMultipleRegistersAsync(
    slaveAddress: 1,
    startAddress: 20,
    data: registersToWrite);
Console.WriteLine("FC16 - Multiple registers written");

// Function Code 23: Read/Write Multiple Registers
var readWriteResult = await master.ReadWriteMultipleRegistersAsync(
    slaveAddress: 1,
    startReadAddress: 0,
    numberOfPointsToRead: 5,
    startWriteAddress: 30,
    writeData: new ushort[] { 100, 200, 300 });
Console.WriteLine($"FC23 - Read/Write result: [{string.Join(", ", readWriteResult)}]");

using ModbusRx.Data;
using System.Buffers;

// Use memory pools for large data operations
var pool = ArrayPool<ushort>.Shared;
var buffer = pool.Rent(1000);

try
{
    // Bulk read operation
    var registers = await master.ReadHoldingRegistersAsync(1, 0, 1000);
    
    // Process data efficiently
    for (int i = 0; i < registers.Length; i++)
    {
        buffer[i] = (ushort)(registers[i] * 2); // Example processing
    }
    
    // Write back efficiently
    await master.WriteMultipleRegistersAsync(1, 1000, buffer.AsSpan(0, registers.Length).ToArray());
}
finally
{
    pool.Return(buffer);
}

// Use spans for zero-copy operations where possible
ReadOnlySpan<ushort> dataSpan = registers;
var floatValue = dataSpan.ToFloat(0);
var doubleValue = dataSpan.ToDouble(2);

using ModbusRx.Device;
using ModbusRx.Data;

// Create high-performance server
using var server = new ModbusServer();

// Use custom data store for better performance
var customDataStore = new DataStore();

// Pre-allocate data for known size
const int dataSize = 10000;
for (int i = 1; i <= dataSize; i++)
{
    customDataStore.HoldingRegisters.Add((ushort)(i % 65536));
    customDataStore.InputRegisters.Add((ushort)(i % 65536));
    customDataStore.CoilDiscretes.Add((i % 2) == 0);
    customDataStore.InputDiscretes.Add((i % 3) == 0);
}

server.DataStore = customDataStore;

// Start optimized TCP server
server.StartTcpServer(502, 1);
server.Start();

Console.WriteLine($"High-performance server started with {dataSize} data points");

using ModbusRx.Device;
using CP.IO.Ports;
using System.Collections.Concurrent;

// Simple connection pool
public class ModbusConnectionPool : IDisposable
{
    private readonly ConcurrentQueue<ModbusIpMaster> _availableConnections = new();
    private readonly string _ipAddress;
    private readonly int _port;
    private readonly int _maxConnections;
    private int _currentConnections;

    public ModbusConnectionPool(string ipAddress, int port = 502, int maxConnections = 10)
    {
        _ipAddress = ipAddress;
        _port = port;
        _maxConnections = maxConnections;
    }

    public async Task<ModbusIpMaster?> GetConnectionAsync()
    {
        if (_availableConnections.TryDequeue(out var connection))
        {
            return connection;
        }

        if (_currentConnections < _maxConnections)
        {
            try
            {
                var client = new TcpClientRx(_ipAddress, _port);
                var master = ModbusIpMaster.CreateIp(client);
                Interlocked.Increment(ref _currentConnections);
                return master;
            }
            catch
            {
                return null;
            }
        }

        return null;
    }

    public void ReturnConnection(ModbusIpMaster connection)
    {
        if (connection != null)
        {
            _availableConnections.Enqueue(connection);
        }
    }

    public void Dispose()
    {
        while (_availableConnections.TryDequeue(out var connection))
        {
            connection.Dispose();
        }
    }
}

// Usage example
using var connectionPool = new ModbusConnectionPool("192.168.1.100", 502, 5);

// Perform multiple concurrent operations
var tasks = Enumerable.Range(0, 20).Select(async i =>
{
    var master = await connectionPool.GetConnectionAsync();
    if (master != null)
    {
        try
        {
            var data = await master.ReadHoldingRegistersAsync(1, (ushort)(i * 10), 10);
            Console.WriteLine($"Task {i}: [{string.Join(", ", data)}]");
        }
        finally
        {
            connectionPool.ReturnConnection(master);
        }
    }
});

await Task.WhenAll(tasks);

using ModbusRx.Device;
using ModbusRx.Data;
using Xunit;

public class ModbusTests
{
    [Fact]
    public async Task TestModbusReadWrite()
    {
        // Arrange - Create test server
        using var server = new ModbusServer();
        var port = GetAvailablePort();
        server.StartTcpServer(port, 1);
        server.Start();
        
        // Load test data
        server.LoadSimulationData(new ushort[] { 1, 2, 3, 4, 5 });
        
        // Create client
        var client = new TcpClientRx("127.0.0.1", port);
        using var master = ModbusIpMaster.CreateIp(client);
        
        // Act
        var result = await master.ReadHoldingRegistersAsync(1, 0, 5);
        
        // Assert
        Assert.Equal(5, result.Length);
        Assert.Equal(1, result[0]);
        Assert.Equal(5, result[4]);
    }

    [Fact]
    public async Task TestModbusWriteOperations()
    {
        using var server = new ModbusServer();
        var port = GetAvailablePort();
        server.StartTcpServer(port, 1);
        server.Start();
        
        var client = new TcpClientRx("127.0.0.1", port);
        using var master = ModbusIpMaster.CreateIp(client);
        
        // Test write single register
        await master.WriteSingleRegisterAsync(1, 0, 12345);
        var readResult = await master.ReadHoldingRegistersAsync(1, 0, 1);
        Assert.Equal(12345, readResult[0]);
        
        // Test write multiple registers
        var writeData = new ushort[] { 1000, 2000, 3000 };
        await master.WriteMultipleRegistersAsync(1, 10, writeData);
        var multiReadResult = await master.ReadHoldingRegistersAsync(1, 10, 3);
        Assert.Equal(writeData, multiReadResult);
    }

    private static int GetAvailablePort()
    {
        using var socket = new System.Net.Sockets.TcpListener(System.Net.IPAddress.Loopback, 0);
        socket.Start();
        var port = ((System.Net.IPEndPoint)socket.LocalEndpoint).Port;
        socket.Stop();
        return port;
    }
}

using ModbusRx.Data;
using Xunit;

public class SimulationTests
{
    [Fact]
    public void TestSimulationPatterns()
    {
        using var provider = new SimulationDataProvider();
        var dataStore = DataStoreFactory.CreateDefaultDataStore();
        
        // Test counting pattern
        provider.LoadTestPattern(dataStore, TestPattern.CountingUp);
        Assert.Equal(0, dataStore.HoldingRegisters[1]);
        Assert.Equal(1, dataStore.HoldingRegisters[2]);
        Assert.Equal(2, dataStore.HoldingRegisters[3]);
        
        // Test sine wave pattern
        provider.LoadTestPattern(dataStore, TestPattern.SineWave);
        Assert.True(dataStore.HoldingRegisters.Skip(1).Take(100).Any(x => x > 0));
    }

    [Fact]
    public void TestWaveGeneration()
    {
        var sineWave = SimulationDataProvider.GenerateSineWave(360, 32767);
        Assert.Equal(360, sineWave.Length);
        Assert.Equal(32767, sineWave[0]); // sin(0) + amplitude
        Assert.True(sineWave[90] > 32767); // sin(90°) = 1
        
        var squareWave = SimulationDataProvider.GenerateSquareWave(100, 1000, 0, 0.5);
        var highCount = squareWave.Count(x => x == 1000);
        Assert.True(Math.Abs(highCount - 50) <= 1); // 50% duty cycle
    }
}

using ModbusRx.Device;
using ModbusRx.Reactive;
using System.Diagnostics;

// Enable debug logging
Debug.WriteLine("Starting Modbus operations");

var client = new TcpClientRx("192.168.1.100", 502);
using var master = ModbusIpMaster.CreateIp(client);

// Monitor transport layer
if (master.Transport != null)
{
    Debug.WriteLine($"Transport Type: {master.Transport.GetType().Name}");
    Debug.WriteLine($"Read Timeout: {master.Transport.ReadTimeout}ms");
    Debug.WriteLine($"Retries: {master.Transport.Retries}");
}

try
{
    var stopwatch = Stopwatch.StartNew();
    var registers = await master.ReadHoldingRegistersAsync(1, 0, 10);
    stopwatch.Stop();
    
    Debug.WriteLine($"Read completed in {stopwatch.ElapsedMilliseconds}ms");
    Debug.WriteLine($"Data: [{string.Join(", ", registers)}]");
}
catch (Exception ex)
{
    Debug.WriteLine($"Error: {ex.GetType().Name} - {ex.Message}");
    Debug.WriteLine($"Stack trace: {ex.StackTrace}");
}

// Use reactive operators for debugging
var masterStream = Create.TcpIpMaster("192.168.1.100", 502);

masterStream
    .ReadHoldingRegisters(0, 10, 1000)
    .Do(result => Debug.WriteLine($"Before processing: {result.data?.Length} registers"))
    .Where(result => result.error == null)
    .Do(result => Debug.WriteLine($"After filtering: Success"))
    .Subscribe(
        result => Debug.WriteLine($"Final result: [{string.Join(", ", result.data!)}]"),
        error => Debug.WriteLine($"Observable error: {error.Message}"));

using Microsoft.Extensions.Configuration;
using Microsoft.Extensions.DependencyInjection;
using ModbusRx.Device;

// Configuration class
public class ModbusConfiguration
{
    public string IpAddress { get; set; } = "127.0.0.1";
    public int Port { get; set; } = 502;
    public int ReadTimeout { get; set; } = 5000;
    public int Retries { get; set; } = 3;
    public byte SlaveAddress { get; set; } = 1;
}

// Service registration
public static class ServiceExtensions
{
    public static IServiceCollection AddModbusRx(
        this IServiceCollection services, 
        IConfiguration configuration)
    {
        services.Configure<ModbusConfiguration>(
            configuration.GetSection("Modbus"));
        
        services.AddSingleton<IModbusMaster>(provider =>
        {
            var config = provider.GetRequiredService<IOptions<ModbusConfiguration>>().Value;
            var client = new TcpClientRx(config.IpAddress, config.Port)
            {
                ReadTimeout = config.ReadTimeout,
                WriteTimeout = config.ReadTimeout
            };
            
            var master = ModbusIpMaster.CreateIp(client);
            if (master.Transport != null)
            {
                master.Transport.ReadTimeout = config.ReadTimeout;
                master.Transport.Retries = config.Retries;
            }
            
            return master;
        });
        
        return services;
    }
}

// Usage in application
var builder = WebApplication.CreateBuilder(args);
builder.Services.AddModbusRx(builder.Configuration);

var app = builder.Build();

// Use injected Modbus master
app.MapGet("/read-registers", async (IModbusMaster master) =>
{
    var registers = await master.ReadHoldingRegistersAsync(1, 0, 10);
    return Results.Ok(registers);
});

{
  "Modbus": {
    "IpAddress": "192.168.1.100",
    "Port": 502,
    "ReadTimeout": 5000,
    "Retries": 3,
    "SlaveAddress": 1
  },
  "ModbusServer": {
    "TcpPort": 502,
    "UdpPort": 503,
    "UnitId": 1,
    "SimulationMode": true,
    "SimulationInterval": 500
  }
}

// Increase timeouts
var client = new TcpClientRx("192.168.1.100", 502)
{
    ReadTimeout = 10000,  // 10 seconds
    WriteTimeout = 10000
};

var master = ModbusIpMaster.CreateIp(client);
master.Transport!.ReadTimeout = 10000;
master.Transport.Retries = 5;

// Ensure addresses are within valid ranges (1-65536)
// Check that start + count doesn't exceed device limits

try
{
    var registers = await master.ReadHoldingRegistersAsync(1, 0, 10);
}
catch (SlaveException ex) when (ex.SlaveExceptionCode == 2)
{
    Console.WriteLine("Address out of range - reduce count or change start address");
}

// Check all serial parameters match device settings
using var port = new SerialPortRx("COM1")
{
    BaudRate = 9600,      // Must match device
    DataBits = 8,         // Check device manual
    Parity = Parity.None, // Common configurations: None, Even, Odd
    StopBits = StopBits.One,
    Handshake = Handshake.None
};

// Verify port is available
var availablePorts = SerialPortRx.GetPortNames();
Console.WriteLine($"Available ports: {string.Join(", ", availablePorts)}");

// Test network connectivity first
using var ping = new System.Net.NetworkInformation.Ping();
var reply = await ping.SendPingAsync("192.168.1.100", 1000);

if (reply.Status == System.Net.NetworkInformation.IPStatus.Success)
{
    Console.WriteLine($"Ping successful: {reply.RoundtripTime}ms");
}
else
{
    Console.WriteLine($"Ping failed: {reply.Status}");
}

// Test port connectivity
using var tcpClient = new System.Net.Sockets.TcpClient();
try
{
    await tcpClient.ConnectAsync("192.168.1.100", 502);
    Console.WriteLine("Port 502 is accessible");
}
catch (Exception ex)
{
    Console.WriteLine($"Port 502 not accessible: {ex.Message}");
}

ModbusRx/
└── src/
    ├── ModbusRx/                  # Core library
    ├── ModbusRx.UnitTests/        # Unit tests
    ├── ModbusRx.IntegrationTests/ # Integration tests
    └── ModbusRx.Server.UI/        # WPF visualization app

# Build for all target frameworks
dotnet build

# Build for specific framework
dotnet build -f net9.0
dotnet build -f netstandard2.0
dotnet build -f net48

ChrisPulman/ModbusRxv1.1.1

Get Started

Readme

ModbusRx - A Reactive Modbus Implementation

Overview

Key Features

Supported Protocols & Target Frameworks

Installation

Quick Start Guide

1. Basic TCP Master Operations

Simple TCP Master Connection

Advanced TCP Master with Error Handling

2. Reactive TCP Master with Automatic Connection Management

3. UDP Master Operations

4. Serial RTU Master

5. Serial ASCII Master

Advanced Server Implementations

1. Creating a Comprehensive Modbus Server

2. TCP Slave Implementation

3. UDP Slave Implementation

4. Serial RTU Slave

Data Type Conversions and Utilities

1. Working with Float and Double Values

2. Working with Different Word Orders

Reactive Programming Features

1. Observing Data Changes

2. Creating Reactive Servers

3. Advanced Reactive Master Operations

Simulation and Testing Features

1. Using the Simulation Data Provider

2. Loading Predefined Test Patterns

3. Dynamic Simulation

Error Handling and Resilience

1. Comprehensive Error Handling

2. Connection Health Monitoring

Protocol Details and Function Codes

Supported Function Codes

Address Ranges and Limitations

Example: Working with All Function Codes

Performance Optimization and Best Practices

1. High-Performance Data Operations

2. Optimized Server Configuration

3. Connection Pooling and Management

Testing and Debugging

1. Unit Testing with ModbusRx

2. Integration Testing with Simulation

3. Debugging and Diagnostics

Configuration and Deployment

1. Configuration for Different Environments

2. appsettings.json Configuration

Troubleshooting Guide

Common Issues and Solutions

1. Connection Timeouts

2. Address Errors

3. Serial Port Issues

4. Network Connectivity

Contributing

Development Setup

Project Structure

Building for Different Targets

License

Support and Community

Getting Help

Acknowledgments