auto_dial (Automatic Dependency Injection Abstraction Layer)

auto_dial is a library that makes setting up Dependency Injection (DI) in .NET applications super easy. Instead of writing a lot of repetitive code to register your services, auto_dial does it for you automatically. It scans your code, finds the services, and registers them with the DI container. This saves time and reduces mistakes.

Why Use auto_dial?
What is Dependency Injection (DI)?
Getting Started
How It Works
Configuration Options
Supported Service Lifetimes
Advanced Scenarios & Behavior
Observing auto_dial's Behavior
Troubleshooting
Contributing
License

Why Use auto_dial?

Safe & Explicit: auto_dial uses an opt-in model. Only services you explicitly mark will be registered, preventing accidental registration of non-service classes.
Less Repetitive Code: You don't have to manually register every service in your application.
Flexible: You can control which services are registered by filtering based on namespaces or assemblies.
Customizable: You can exclude specific services from being registered if needed.
Supports Different Lifetimes: Easily configure services as Singleton, Scoped, or Transient.

What is Dependency Injection (DI)?

Dependency Injection is a way to manage the dependencies (like services or classes) that your application needs. Instead of creating these dependencies manually, DI allows you to "inject" them into your classes. This makes your code cleaner, easier to test, and more maintainable.

For example:

public class MyClass
{
    private readonly IMyService _myService;

    public MyClass(IMyService myService)
    {
        _myService = myService; // The service is injected here
    }

    public void DoSomething()
    {
        _myService.DoWork();
    }
}

With DI, you don't have to worry about creating IMyService. The DI container does it for you.

Getting Started

Step 1: Install the Library

First, add the auto_dial library to your project using NuGet. Open your terminal and run:

dotnet add package auto_dial

This will download and add the library to your project.

Step 2: Set Up Your Services

To make a class eligible for auto-registration, decorate it with the [ServiceLifetime] attribute. This tells auto_dial that the class is a service and specifies its lifetime.

Let’s say you have a service like this:

using Microsoft.Extensions.DependencyInjection;
using auto_dial; // Add this using directive

public interface IMyService
{
    void DoWork();
}

[ServiceLifetime(ServiceLifetime.Scoped)] // Opt-in for registration
public class MyService : IMyService
{
    public void DoWork()
    {
        Console.WriteLine("MyService is working!");
    }
}

And you want to use this service in another class (which also needs to be registered):

[ServiceLifetime(ServiceLifetime.Transient)] // This class also needs to be registered to be resolved
public class ConsumerClass
{
    private readonly IMyService _myService;

    public ConsumerClass(IMyService myService)
    {
        _myService = myService;
    }

    public void Execute()
    {
        _myService.DoWork();
    }
}

Step 3: Use auto_dial to Register Services

Here’s how you can use auto_dial to automatically register your decorated services. This example also includes setting up the standard .NET console logger to see the output.

using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Logging;
using auto_dial;

class Program
{
    static void Main()
    {
        var services = new ServiceCollection();

        // 1. Configure Logging (Optional, but recommended for visibility)
        services.AddLogging(configure => 
        {
            configure.AddConsole();
            configure.SetMinimumLevel(LogLevel.Information);
        });

        // 2. Automatically register services in the same assembly
        services.AddAutoDial(options =>
        {
            options.FromAssemblyOf<MyService>(); // Scan the assembly containing MyService
            options.IfExceptionOccurs((exception) =>
            {
                // You can get a logger here to handle the exception
                var logger = services.BuildServiceProvider().GetService<ILogger<Program>>();
                logger?.LogCritical(exception, "An error occurred during service registration.");
            });
        });

        var serviceProvider = services.BuildServiceProvider();

        // 3. Resolve and use your services
        var consumer = serviceProvider.GetRequiredService<ConsumerClass>();
        consumer.Execute();
    }
}

How It Works

auto_dial simplifies DI setup by automating service registration. Here’s a deeper look into its mechanisms:

AddAutoDial(): This is the primary extension method on IServiceCollection to initiate auto-registration.
configure action (optional): An Action<AutoDialRegistrationBuilder> that allows you to customize the registration process using the fluent API (e.g., FromAssemblyOf, InNamespaceStartingWith, ExcludeInterface).
Service Discovery (Opt-In Model): auto_dial uses reflection to scan the specified assembly for classes decorated with the [ServiceLifetime] attribute. This attribute serves as the explicit opt-in signal for registration.
Default Behavior: If no configure action is provided, auto_dial will scan the assembly where it is called. Only classes with the [ServiceLifetime] attribute will be registered. There is no default registration for undecorated classes.
Interface Matching: For each registered class, auto_dial attempts to find a corresponding interface to register it against. The interface must be in an eligible namespace and not be explicitly excluded.
Concrete Type Registration: If a class is decorated with [ServiceLifetime] but does not have a suitable interface, it will be registered as a concrete type (e.g., services.AddScoped<MyConcreteClass>()).
Dependency Resolution (Topological Sort): Before registering services, auto_dial builds a dependency graph of all discovered services. It then performs a topological sort (Kahn's algorithm) to determine the correct order of registration, ensuring that dependencies are registered before the services that consume them.
Circular Dependency Detection: If the topological sort detects a circular dependency, auto_dial will throw an InvalidOperationException.
CompleteAutoRegistration(): This method is called internally by AddAutoDial(), so you no longer need to call it explicitly.

Configuration Options

auto_dial gives you several options to customize how services are registered and how its dependency validation behaves:

1. Register Services from a Specific Assembly

Use AddAutoDial() with FromAssemblyOf<T>() to scan a specific assembly for services.

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyService>(); // Scans the assembly containing MyService
});

2. Filter Services by Namespace

If you only want to register services from specific namespaces, use InNamespaceStartingWith():

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyService>(); // Scans the assembly containing MyService
    options.InNamespaceStartingWith("MyApp.Services", "MyApp.Common"); // Filters to these namespaces
});

3. Exclude Specific Interfaces or Implementations

You can exclude certain interfaces or implementations from being registered:

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyService>();
    options.ExcludeInterface<IMyService>(); // Exclude IMyService from registration
});

Or exclude multiple interfaces:

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyService>();
    options.ExcludeInterfaces(typeof(IMyService), typeof(IOtherService));
});

You can also exclude an implementation using the [ExcludeFromDI] attribute on the class:

using auto_dial;

[ExcludeFromDI]
public class ExcludedService : IMyService
{
    public void DoWork() { /* ... */ }
}

4. Ignore Dependencies in Validation (Extensible Exemption List)

By default, auto_dial's dependency validator ignores common framework types (like ILogger<T>, IOptions<T>, IConfiguration, IServiceProvider, primitive types, etc.). However, you can extend this list for your own custom types or third-party libraries:

Ignore a specific type:
options.IgnoreDependency<IMyCustomFrameworkType>(); options.IgnoreDependency(typeof(AnotherCustomType));
Ignore all types from a specific namespace prefix:
options.IgnoreDependenciesFromNamespace("MyCustomFramework.Abstractions");
Ignore types based on a custom predicate (most flexible):
options.IgnoreDependencyWhere(type => type.Name.EndsWith("Options") || (type.IsGenericType && type.GetGenericTypeDefinition() == typeof(IMyWrapper<>)) );

5. Convention-Based Registration

This feature allows you to define your own rules for automatically registering services, reducing the need for [ServiceLifetime] attributes on every class. The [ServiceLifetime] attribute will always override any convention.

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyApplicationAssembly>();
    options.InNamespaceStartingWith("MyApplication.Services");

    // Register all classes ending with "Service" as Scoped, unless an attribute specifies otherwise.
    options.RegisterByConvention(type => type.Name.EndsWith("Service"), ServiceLifetime.Scoped);
});

6. Registering Multiple Implementations of an Interface

auto_dial supports registering multiple concrete implementations for the same interface. The underlying Microsoft.Extensions.DependencyInjection container will then allow you to resolve all of them as an IEnumerable<TService>. Just decorate each implementation with its own [ServiceLifetime] attribute.

using Microsoft.Extensions.DependencyInjection;
using auto_dial;
using System.Collections.Generic;
using System.Linq;

// Define an interface and multiple implementations
public interface INotificationService
{
    string SendNotification();
}

[ServiceLifetime(ServiceLifetime.Transient)]
public class EmailNotificationService : INotificationService
{
    public string SendNotification() => "Email sent!";
}

[ServiceLifetime(ServiceLifetime.Transient)]
public class SmsNotificationService : INotificationService
{
    public string SendNotification() => "SMS sent!";
}

class Program
{
    static void Main()
    {
        var services = new ServiceCollection();

        services.AddAutoDial(options =>
        {
            options.FromAssemblyOf<EmailNotificationService>();
            options.InNamespaceStartingWith("YourApp.Notifications"); // Assuming these services are in this namespace
        });

        var serviceProvider = services.BuildServiceProvider();

        // Resolve all implementations of INotificationService
        IEnumerable<INotificationService> notificationServices = serviceProvider.GetServices<INotificationService>();

        Console.WriteLine($"Found {notificationServices.Count()} notification services:");
        foreach (var service in notificationServices)
        {
            Console.WriteLine($"- {service.GetType().Name}: {service.SendNotification()}");
        }

        // Output:
        // Found 2 notification services:
        // - EmailNotificationService: Email sent!
        // - SmsNotificationService: SMS sent!
    }
}

7. Registering Concrete Types (Without an Interface)

Sometimes you might have a class that doesn't implement an interface but still needs to be registered in the DI container. auto_dial can register these directly as long as they are decorated with [ServiceLifetime] or match a convention.

using Microsoft.Extensions.DependencyInjection;
using auto_dial;
using System;

[ServiceLifetime(ServiceLifetime.Singleton)]
public class UtilityService
{
    public string GetCurrentTime() => DateTime.Now.ToShortTimeString();
}

class Program
{
    static void Main()
    {
        var services = new ServiceCollection();

        services.AddAutoDial(options =>
        {
            options.FromAssemblyOf<UtilityService>();
            options.InNamespaceStartingWith("YourApp.Utilities"); // Assuming UtilityService is in this namespace
        });

        var serviceProvider = services.BuildServiceProvider();

        // Resolve the concrete UtilityService directly
        UtilityService utilityService = serviceProvider.GetRequiredService<UtilityService>();

        Console.WriteLine($"Current time: {utilityService.GetCurrentTime()}");
    }
}

Supported Service Lifetimes

auto_dial has an opt-in registration model. To register a service, you must decorate the implementation class with the [ServiceLifetime] attribute or match a defined convention. This attribute tells auto_dial to register the service and specifies its lifetime.

Singleton: One instance for the entire application.
Scoped: One instance per request (e.g., per HTTP request in a web app).
Transient: A new instance every time the service is requested.

If a class is not decorated with [ServiceLifetime] and does not match any convention, it will be ignored.

using Microsoft.Extensions.DependencyInjection;
using auto_dial; // Ensure this using directive is present

[ServiceLifetime(ServiceLifetime.Singleton)] // This service will be registered as a Singleton
public class MySingletonService : IMyService
{
    public void DoWork()
    {
        Console.WriteLine("Singleton service is working!");
    }
}

public class NotAService // This class will be ignored by auto_dial
{
    // ...
}

Advanced Scenarios & Behavior

Levels of Granularity: Balancing Magic and Control

auto_dial offers various levels of control over service registration, allowing you to choose the right balance between boilerplate reduction ("magic") and explicit configuration. This flexibility ensures you can adapt the library to your project's conventions and needs.

1. Full Magic: Convention-Based Registration (Least Boilerplate)

This is the most hands-off approach. You define a convention (e.g., all classes ending in "Service" or all classes that inherit from a specific type) and auto_dial automatically registers them. This is ideal for projects with strict conventions.

How to use: Use options.RegisterByConvention(predicate, defaultLifetime).
Pros: Minimal boilerplate; you only configure the convention once.
Cons: Less explicit; relies on consistent adherence to conventions. Can accidentally register non-service classes if conventions are not strict.

using auto_dial;
using Microsoft.Extensions.DependencyInjection;
using System;

// Example: Register all classes ending with "Service" as Scoped by default
services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyApplicationAssembly>();
    options.InNamespaceStartingWith("MyApplication.Services");

    options.RegisterByConvention(type => type.Name.EndsWith("Service"), ServiceLifetime.Scoped);
});

// Example: Register all classes inheriting from a specific base class as Transient
services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyApplicationAssembly>();
    options.RegisterByConvention(TypeFilters.InheritsOrImplements<MyBaseService>(), ServiceLifetime.Transient);
});

// Example: Register all classes with a specific custom attribute as Singleton
[MyCustomServiceAttribute]
public class MyCustomService : IMyCustomService { }

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyApplicationAssembly>();
    options.RegisterByConvention(TypeFilters.HasAttribute<MyCustomServiceAttribute>(), ServiceLifetime.Singleton);
});

2. Balanced Control: `[ServiceLifetime]` Attribute (Recommended Default)

This is the explicit opt-in model. You decorate each service with the [ServiceLifetime] attribute. This is the recommended default as it provides clear intent and strong type safety.

How to use: Apply [ServiceLifetime(Lifetime)] to each service class.
Pros: Explicit, safe, and easy to understand at a glance. No accidental registrations.
Cons: Requires adding an attribute to every service class (some boilerplate).

using auto_dial;
using Microsoft.Extensions.DependencyInjection;

[ServiceLifetime(ServiceLifetime.Scoped)]
public class MyService : IMyService { /* ... */ }

[ServiceLifetime(ServiceLifetime.Singleton)]
public class AnotherService : IAnotherService { /* ... */ }

3. Fine-Grained Control: Exclusion Attributes (Opt-Out for Specific Cases)

Even with conventions or attributes, you might need to prevent a specific class from being registered. The [ExcludeFromDI] attribute provides this override.

How to use: Apply [ExcludeFromDI] to the service class.
Pros: Provides a powerful override for specific cases.
Cons: Should be used sparingly; if you find yourself using it often, your conventions might need adjustment.

using auto_dial;

[ExcludeFromDI]
[ServiceLifetime(ServiceLifetime.Scoped)] // This attribute will be ignored due to [ExcludeFromDI]
public class ExcludedService : IExcludedService { /* ... */ }

4. Dependency Validation Exclusions (Ignoring Specific Constructor Parameters)

auto_dial's dependency validator is smart enough to ignore common framework types. However, you can extend this for your own custom types or third-party libraries that are resolved by other means.

Ignore a specific type:
options.IgnoreDependency<IMyCustomFrameworkType>(); options.IgnoreDependency(typeof(AnotherCustomType));
Ignore all types from a specific namespace prefix:
options.IgnoreDependenciesFromNamespace("MyCustomFramework.Abstractions");
Ignore types based on a custom predicate (most flexible):
options.IgnoreDependencyWhere(type => type.Name.EndsWith("Options") || (type.IsGenericType && type.GetGenericTypeDefinition() == typeof(IMyWrapper<>)) );

Interface vs. Concrete Type Registration

auto_dial follows a clear logic for registration:

It begins by finding a class that is a candidate for registration (either via [ServiceLifetime] attribute or convention).
It then checks if that class implements any eligible interfaces.
If a suitable interface is found, the service is registered against the interface (e.g., services.AddScoped<IMyService, MyService>()). This is the default and recommended behavior.
If no suitable interface is found, the service is registered against its own concrete type (e.g., services.AddScoped<MyService, MyService>()).

Handling Multi-Interface Services

It's important to note the "One Registration Per Class" rule. Even if a class implements multiple valid interfaces, auto_dial will only ever create one registration for it. It picks the first eligible interface it discovers and ignores the rest.

If you need to control which interface is chosen, you can use the ExcludeInterface<T>() configuration option. This is an advanced feature for resolving ambiguity.

Example:

public interface ICanShip { }
public interface ICanBill { }

[ServiceLifetime(ServiceLifetime.Scoped)]
public class OrderService : ICanShip, ICanBill { /* ... */ }

// By default, OrderService might register as ICanShip.
// To force it to register as ICanBill, you would do this:

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<OrderService>();
    options.ExcludeInterface<ICanShip>(); // Ignore this one
});

Constructor Selection for Dependency Resolution

When a service has multiple constructors, the DependencyResolver needs to know which one to analyze to find its dependencies. auto_dial uses a simple and common convention: it selects the constructor with the most parameters.

Hybrid Registration: Mixing Manual and Automatic

It is common to mix manual service registration with auto_dial. The dependency validation in auto_dial is designed to support this. It is aware of services that have already been registered in the IServiceCollection before it runs.

IMPORTANT: For this to work, you must perform your manual registrations before you call the AddAutoDial() method. The validation check can only see what has already been added to the service collection.

var services = new ServiceCollection();

// 1. Manually register a third-party service or a complex factory
services.AddSingleton<IThirdPartyService>(new ThirdPartyService());

// 2. Use auto_dial for your application services
// auto_dial will correctly see that IThirdPartyService is available for any
// of your auto-registered services that depend on it.
services.AddAutoDial(options => 
{
    options.FromAssemblyOf<MyApplicationService>();
});

Observing `auto_dial`'s Behavior

The core auto_dial library does not write to the console or any other output sink. It is completely silent.

To see what the library is doing, you should use a standard logging framework like Microsoft.Extensions.Logging. The example console application in this repository (auto_dial.console.tests) is configured to use the console logger. When you run it, you will see output from the services as they are created by the DI container. This is not output from auto_dial itself, but rather from the example services that have had an ILogger injected into them.

By configuring the log level in Program.cs, you can control how much detail you see.

Troubleshooting

auto_dial is designed to fail fast and provide clear error messages when it detects a problem with your dependency setup. Here are some common errors and how to resolve them:

Unregistered Dependency: This is the most common error. It occurs when a service depends on another service that auto_dial cannot find.
- Error Message: auto_dial Error: Cannot resolve dependency 'IServiceB' for the constructor of class 'ServiceA'. Please ensure that the implementation for this service is decorated with the [ServiceLifetime] attribute and is included in the assembly/namespace scan, or that it has been registered manually before calling AddAutoDial().
- Solution: This means ServiceA depends on IServiceB, but auto_dial couldn't find a registration for IServiceB. To fix this, you must either:
  1. Find the class that implements IServiceB and add the [ServiceLifetime] attribute to it, OR
  2. Ensure that you are manually registering IServiceB in the IServiceCollection before you call AddAutoDial().
Service Not Registered: This can happen for a few reasons.
1. The service implementation class is missing the [ServiceLifetime] attribute.
2. The service is in a namespace or assembly that is not being scanned. Check your FromAssemblyOf<T>() and InNamespaceStartingWith() configurations.
3. The service class is decorated with the [ExcludeFromDI] attribute.
Circular Dependency Detected: This error occurs when two or more services depend on each other in a loop.
- Error Message: auto_dial Error: A circular dependency was detected. The registration order cannot be determined. Dependency chain: ServiceA -> ServiceB -> ServiceA.
- Solution: You must refactor your services to break the dependency cycle. For example, instead of ServiceA depending on ServiceB directly, you could have ServiceA depend on a factory or Lazy<ServiceB> to break the cycle at instantiation time.

Contributing

We welcome contributions! Feel free to fork the repository, open issues, or submit pull requests.

License

This project is licensed under the MIT License. See the LICENSE file for details.

auto_dial (Automatic Dependency Injection Abstraction Layer)

Why Use auto_dial?
What is Dependency Injection (DI)?
Getting Started
How It Works
Configuration Options
Supported Service Lifetimes
Advanced Scenarios & Behavior
Observing auto_dial's Behavior
Troubleshooting
Contributing
License

Why Use auto_dial?

Safe & Explicit: auto_dial uses an opt-in model. Only services you explicitly mark will be registered, preventing accidental registration of non-service classes.
Less Repetitive Code: You don't have to manually register every service in your application.
Flexible: You can control which services are registered by filtering based on namespaces or assemblies.
Customizable: You can exclude specific services from being registered if needed.
Supports Different Lifetimes: Easily configure services as Singleton, Scoped, or Transient.

What is Dependency Injection (DI)?

For example:

public class MyClass
{
    private readonly IMyService _myService;

    public MyClass(IMyService myService)
    {
        _myService = myService; // The service is injected here
    }

    public void DoSomething()
    {
        _myService.DoWork();
    }
}

With DI, you don't have to worry about creating IMyService. The DI container does it for you.

Getting Started

Step 1: Install the Library

First, add the auto_dial library to your project using NuGet. Open your terminal and run:

dotnet add package auto_dial

This will download and add the library to your project.

Step 2: Set Up Your Services

To make a class eligible for auto-registration, decorate it with the [ServiceLifetime] attribute. This tells auto_dial that the class is a service and specifies its lifetime.

Let’s say you have a service like this:

using Microsoft.Extensions.DependencyInjection;
using auto_dial; // Add this using directive

public interface IMyService
{
    void DoWork();
}

[ServiceLifetime(ServiceLifetime.Scoped)] // Opt-in for registration
public class MyService : IMyService
{
    public void DoWork()
    {
        Console.WriteLine("MyService is working!");
    }
}

And you want to use this service in another class (which also needs to be registered):

[ServiceLifetime(ServiceLifetime.Transient)] // This class also needs to be registered to be resolved
public class ConsumerClass
{
    private readonly IMyService _myService;

    public ConsumerClass(IMyService myService)
    {
        _myService = myService;
    }

    public void Execute()
    {
        _myService.DoWork();
    }
}

Step 3: Use auto_dial to Register Services

Here’s how you can use auto_dial to automatically register your decorated services. This example also includes setting up the standard .NET console logger to see the output.

using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Logging;
using auto_dial;

class Program
{
    static void Main()
    {
        var services = new ServiceCollection();

        // 1. Configure Logging (Optional, but recommended for visibility)
        services.AddLogging(configure => 
        {
            configure.AddConsole();
            configure.SetMinimumLevel(LogLevel.Information);
        });

        // 2. Automatically register services in the same assembly
        services.AddAutoDial(options =>
        {
            options.FromAssemblyOf<MyService>(); // Scan the assembly containing MyService
            options.IfExceptionOccurs((exception) =>
            {
                // You can get a logger here to handle the exception
                var logger = services.BuildServiceProvider().GetService<ILogger<Program>>();
                logger?.LogCritical(exception, "An error occurred during service registration.");
            });
        });

        var serviceProvider = services.BuildServiceProvider();

        // 3. Resolve and use your services
        var consumer = serviceProvider.GetRequiredService<ConsumerClass>();
        consumer.Execute();
    }
}

How It Works

auto_dial simplifies DI setup by automating service registration. Here’s a deeper look into its mechanisms:

AddAutoDial(): This is the primary extension method on IServiceCollection to initiate auto-registration.
configure action (optional): An Action<AutoDialRegistrationBuilder> that allows you to customize the registration process using the fluent API (e.g., FromAssemblyOf, InNamespaceStartingWith, ExcludeInterface).
Service Discovery (Opt-In Model): auto_dial uses reflection to scan the specified assembly for classes decorated with the [ServiceLifetime] attribute. This attribute serves as the explicit opt-in signal for registration.
Default Behavior: If no configure action is provided, auto_dial will scan the assembly where it is called. Only classes with the [ServiceLifetime] attribute will be registered. There is no default registration for undecorated classes.
Interface Matching: For each registered class, auto_dial attempts to find a corresponding interface to register it against. The interface must be in an eligible namespace and not be explicitly excluded.
Concrete Type Registration: If a class is decorated with [ServiceLifetime] but does not have a suitable interface, it will be registered as a concrete type (e.g., services.AddScoped<MyConcreteClass>()).
Dependency Resolution (Topological Sort): Before registering services, auto_dial builds a dependency graph of all discovered services. It then performs a topological sort (Kahn's algorithm) to determine the correct order of registration, ensuring that dependencies are registered before the services that consume them.
Circular Dependency Detection: If the topological sort detects a circular dependency, auto_dial will throw an InvalidOperationException.
CompleteAutoRegistration(): This method is called internally by AddAutoDial(), so you no longer need to call it explicitly.

Configuration Options

auto_dial gives you several options to customize how services are registered and how its dependency validation behaves:

1. Register Services from a Specific Assembly

Use AddAutoDial() with FromAssemblyOf<T>() to scan a specific assembly for services.

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyService>(); // Scans the assembly containing MyService
});

2. Filter Services by Namespace

If you only want to register services from specific namespaces, use InNamespaceStartingWith():

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyService>(); // Scans the assembly containing MyService
    options.InNamespaceStartingWith("MyApp.Services", "MyApp.Common"); // Filters to these namespaces
});

3. Exclude Specific Interfaces or Implementations

You can exclude certain interfaces or implementations from being registered:

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyService>();
    options.ExcludeInterface<IMyService>(); // Exclude IMyService from registration
});

Or exclude multiple interfaces:

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyService>();
    options.ExcludeInterfaces(typeof(IMyService), typeof(IOtherService));
});

You can also exclude an implementation using the [ExcludeFromDI] attribute on the class:

using auto_dial;

[ExcludeFromDI]
public class ExcludedService : IMyService
{
    public void DoWork() { /* ... */ }
}

4. Ignore Dependencies in Validation (Extensible Exemption List)

Ignore a specific type:
options.IgnoreDependency<IMyCustomFrameworkType>(); options.IgnoreDependency(typeof(AnotherCustomType));
Ignore all types from a specific namespace prefix:
options.IgnoreDependenciesFromNamespace("MyCustomFramework.Abstractions");
Ignore types based on a custom predicate (most flexible):
options.IgnoreDependencyWhere(type => type.Name.EndsWith("Options") || (type.IsGenericType && type.GetGenericTypeDefinition() == typeof(IMyWrapper<>)) );

5. Convention-Based Registration

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyApplicationAssembly>();
    options.InNamespaceStartingWith("MyApplication.Services");

    // Register all classes ending with "Service" as Scoped, unless an attribute specifies otherwise.
    options.RegisterByConvention(type => type.Name.EndsWith("Service"), ServiceLifetime.Scoped);
});

6. Registering Multiple Implementations of an Interface

using Microsoft.Extensions.DependencyInjection;
using auto_dial;
using System.Collections.Generic;
using System.Linq;

// Define an interface and multiple implementations
public interface INotificationService
{
    string SendNotification();
}

[ServiceLifetime(ServiceLifetime.Transient)]
public class EmailNotificationService : INotificationService
{
    public string SendNotification() => "Email sent!";
}

[ServiceLifetime(ServiceLifetime.Transient)]
public class SmsNotificationService : INotificationService
{
    public string SendNotification() => "SMS sent!";
}

class Program
{
    static void Main()
    {
        var services = new ServiceCollection();

        services.AddAutoDial(options =>
        {
            options.FromAssemblyOf<EmailNotificationService>();
            options.InNamespaceStartingWith("YourApp.Notifications"); // Assuming these services are in this namespace
        });

        var serviceProvider = services.BuildServiceProvider();

        // Resolve all implementations of INotificationService
        IEnumerable<INotificationService> notificationServices = serviceProvider.GetServices<INotificationService>();

        Console.WriteLine($"Found {notificationServices.Count()} notification services:");
        foreach (var service in notificationServices)
        {
            Console.WriteLine($"- {service.GetType().Name}: {service.SendNotification()}");
        }

        // Output:
        // Found 2 notification services:
        // - EmailNotificationService: Email sent!
        // - SmsNotificationService: SMS sent!
    }
}

7. Registering Concrete Types (Without an Interface)

using Microsoft.Extensions.DependencyInjection;
using auto_dial;
using System;

[ServiceLifetime(ServiceLifetime.Singleton)]
public class UtilityService
{
    public string GetCurrentTime() => DateTime.Now.ToShortTimeString();
}

class Program
{
    static void Main()
    {
        var services = new ServiceCollection();

        services.AddAutoDial(options =>
        {
            options.FromAssemblyOf<UtilityService>();
            options.InNamespaceStartingWith("YourApp.Utilities"); // Assuming UtilityService is in this namespace
        });

        var serviceProvider = services.BuildServiceProvider();

        // Resolve the concrete UtilityService directly
        UtilityService utilityService = serviceProvider.GetRequiredService<UtilityService>();

        Console.WriteLine($"Current time: {utilityService.GetCurrentTime()}");
    }
}

Supported Service Lifetimes

Singleton: One instance for the entire application.
Scoped: One instance per request (e.g., per HTTP request in a web app).
Transient: A new instance every time the service is requested.

If a class is not decorated with [ServiceLifetime] and does not match any convention, it will be ignored.

using Microsoft.Extensions.DependencyInjection;
using auto_dial; // Ensure this using directive is present

[ServiceLifetime(ServiceLifetime.Singleton)] // This service will be registered as a Singleton
public class MySingletonService : IMyService
{
    public void DoWork()
    {
        Console.WriteLine("Singleton service is working!");
    }
}

public class NotAService // This class will be ignored by auto_dial
{
    // ...
}

Advanced Scenarios & Behavior

Levels of Granularity: Balancing Magic and Control

1. Full Magic: Convention-Based Registration (Least Boilerplate)

How to use: Use options.RegisterByConvention(predicate, defaultLifetime).
Pros: Minimal boilerplate; you only configure the convention once.
Cons: Less explicit; relies on consistent adherence to conventions. Can accidentally register non-service classes if conventions are not strict.

using auto_dial;
using Microsoft.Extensions.DependencyInjection;
using System;

// Example: Register all classes ending with "Service" as Scoped by default
services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyApplicationAssembly>();
    options.InNamespaceStartingWith("MyApplication.Services");

    options.RegisterByConvention(type => type.Name.EndsWith("Service"), ServiceLifetime.Scoped);
});

// Example: Register all classes inheriting from a specific base class as Transient
services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyApplicationAssembly>();
    options.RegisterByConvention(TypeFilters.InheritsOrImplements<MyBaseService>(), ServiceLifetime.Transient);
});

// Example: Register all classes with a specific custom attribute as Singleton
[MyCustomServiceAttribute]
public class MyCustomService : IMyCustomService { }

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<MyApplicationAssembly>();
    options.RegisterByConvention(TypeFilters.HasAttribute<MyCustomServiceAttribute>(), ServiceLifetime.Singleton);
});

2. Balanced Control: `[ServiceLifetime]` Attribute (Recommended Default)

This is the explicit opt-in model. You decorate each service with the [ServiceLifetime] attribute. This is the recommended default as it provides clear intent and strong type safety.

How to use: Apply [ServiceLifetime(Lifetime)] to each service class.
Pros: Explicit, safe, and easy to understand at a glance. No accidental registrations.
Cons: Requires adding an attribute to every service class (some boilerplate).

using auto_dial;
using Microsoft.Extensions.DependencyInjection;

[ServiceLifetime(ServiceLifetime.Scoped)]
public class MyService : IMyService { /* ... */ }

[ServiceLifetime(ServiceLifetime.Singleton)]
public class AnotherService : IAnotherService { /* ... */ }

3. Fine-Grained Control: Exclusion Attributes (Opt-Out for Specific Cases)

Even with conventions or attributes, you might need to prevent a specific class from being registered. The [ExcludeFromDI] attribute provides this override.

How to use: Apply [ExcludeFromDI] to the service class.
Pros: Provides a powerful override for specific cases.
Cons: Should be used sparingly; if you find yourself using it often, your conventions might need adjustment.

using auto_dial;

[ExcludeFromDI]
[ServiceLifetime(ServiceLifetime.Scoped)] // This attribute will be ignored due to [ExcludeFromDI]
public class ExcludedService : IExcludedService { /* ... */ }

4. Dependency Validation Exclusions (Ignoring Specific Constructor Parameters)

auto_dial's dependency validator is smart enough to ignore common framework types. However, you can extend this for your own custom types or third-party libraries that are resolved by other means.

Ignore a specific type:
options.IgnoreDependency<IMyCustomFrameworkType>(); options.IgnoreDependency(typeof(AnotherCustomType));
Ignore all types from a specific namespace prefix:
options.IgnoreDependenciesFromNamespace("MyCustomFramework.Abstractions");
Ignore types based on a custom predicate (most flexible):
options.IgnoreDependencyWhere(type => type.Name.EndsWith("Options") || (type.IsGenericType && type.GetGenericTypeDefinition() == typeof(IMyWrapper<>)) );

Interface vs. Concrete Type Registration

auto_dial follows a clear logic for registration:

It begins by finding a class that is a candidate for registration (either via [ServiceLifetime] attribute or convention).
It then checks if that class implements any eligible interfaces.
If a suitable interface is found, the service is registered against the interface (e.g., services.AddScoped<IMyService, MyService>()). This is the default and recommended behavior.
If no suitable interface is found, the service is registered against its own concrete type (e.g., services.AddScoped<MyService, MyService>()).

Handling Multi-Interface Services

If you need to control which interface is chosen, you can use the ExcludeInterface<T>() configuration option. This is an advanced feature for resolving ambiguity.

Example:

public interface ICanShip { }
public interface ICanBill { }

[ServiceLifetime(ServiceLifetime.Scoped)]
public class OrderService : ICanShip, ICanBill { /* ... */ }

// By default, OrderService might register as ICanShip.
// To force it to register as ICanBill, you would do this:

services.AddAutoDial(options =>
{
    options.FromAssemblyOf<OrderService>();
    options.ExcludeInterface<ICanShip>(); // Ignore this one
});

Constructor Selection for Dependency Resolution

Hybrid Registration: Mixing Manual and Automatic

var services = new ServiceCollection();

// 1. Manually register a third-party service or a complex factory
services.AddSingleton<IThirdPartyService>(new ThirdPartyService());

// 2. Use auto_dial for your application services
// auto_dial will correctly see that IThirdPartyService is available for any
// of your auto-registered services that depend on it.
services.AddAutoDial(options => 
{
    options.FromAssemblyOf<MyApplicationService>();
});

Observing `auto_dial`'s Behavior

The core auto_dial library does not write to the console or any other output sink. It is completely silent.

By configuring the log level in Program.cs, you can control how much detail you see.

Troubleshooting

auto_dial is designed to fail fast and provide clear error messages when it detects a problem with your dependency setup. Here are some common errors and how to resolve them:

Unregistered Dependency: This is the most common error. It occurs when a service depends on another service that auto_dial cannot find.
- Error Message: auto_dial Error: Cannot resolve dependency 'IServiceB' for the constructor of class 'ServiceA'. Please ensure that the implementation for this service is decorated with the [ServiceLifetime] attribute and is included in the assembly/namespace scan, or that it has been registered manually before calling AddAutoDial().
- Solution: This means ServiceA depends on IServiceB, but auto_dial couldn't find a registration for IServiceB. To fix this, you must either:
  1. Find the class that implements IServiceB and add the [ServiceLifetime] attribute to it, OR
  2. Ensure that you are manually registering IServiceB in the IServiceCollection before you call AddAutoDial().
Service Not Registered: This can happen for a few reasons.
1. The service implementation class is missing the [ServiceLifetime] attribute.
2. The service is in a namespace or assembly that is not being scanned. Check your FromAssemblyOf<T>() and InNamespaceStartingWith() configurations.
3. The service class is decorated with the [ExcludeFromDI] attribute.
Circular Dependency Detected: This error occurs when two or more services depend on each other in a loop.
- Error Message: auto_dial Error: A circular dependency was detected. The registration order cannot be determined. Dependency chain: ServiceA -> ServiceB -> ServiceA.
- Solution: You must refactor your services to break the dependency cycle. For example, instead of ServiceA depending on ServiceB directly, you could have ServiceA depend on a factory or Lazy<ServiceB> to break the cycle at instantiation time.

Contributing

We welcome contributions! Feel free to fork the repository, open issues, or submit pull requests.

License

This project is licensed under the MIT License. See the LICENSE file for details.

nmaina/auto_dialv1.5.8

Get Started

Readme

auto_dial (Automatic Dependency Injection Abstraction Layer)

Table of Contents

Why Use auto_dial?

What is Dependency Injection (DI)?

Getting Started

Step 1: Install the Library

Step 2: Set Up Your Services

Step 3: Use auto_dial to Register Services

How It Works

Configuration Options

1. Register Services from a Specific Assembly

2. Filter Services by Namespace

3. Exclude Specific Interfaces or Implementations

4. Ignore Dependencies in Validation (Extensible Exemption List)

5. Convention-Based Registration

6. Registering Multiple Implementations of an Interface

7. Registering Concrete Types (Without an Interface)

Supported Service Lifetimes

Advanced Scenarios & Behavior

Levels of Granularity: Balancing Magic and Control

1. Full Magic: Convention-Based Registration (Least Boilerplate)

2. Balanced Control: [ServiceLifetime] Attribute (Recommended Default)

3. Fine-Grained Control: Exclusion Attributes (Opt-Out for Specific Cases)

4. Dependency Validation Exclusions (Ignoring Specific Constructor Parameters)

Interface vs. Concrete Type Registration

Handling Multi-Interface Services

Constructor Selection for Dependency Resolution

Hybrid Registration: Mixing Manual and Automatic

Observing auto_dial's Behavior

Troubleshooting

Contributing

License

nmaina/auto_dialv1.5.8

Get Started

Readme

auto_dial (Automatic Dependency Injection Abstraction Layer)

Table of Contents

Why Use auto_dial?

What is Dependency Injection (DI)?

Getting Started

Step 1: Install the Library

Step 2: Set Up Your Services

Step 3: Use auto_dial to Register Services

How It Works

Configuration Options

1. Register Services from a Specific Assembly

2. Filter Services by Namespace

3. Exclude Specific Interfaces or Implementations

4. Ignore Dependencies in Validation (Extensible Exemption List)

5. Convention-Based Registration

6. Registering Multiple Implementations of an Interface

7. Registering Concrete Types (Without an Interface)

Supported Service Lifetimes

Advanced Scenarios & Behavior

Levels of Granularity: Balancing Magic and Control

1. Full Magic: Convention-Based Registration (Least Boilerplate)

2. Balanced Control: [ServiceLifetime] Attribute (Recommended Default)

3. Fine-Grained Control: Exclusion Attributes (Opt-Out for Specific Cases)

4. Dependency Validation Exclusions (Ignoring Specific Constructor Parameters)

Interface vs. Concrete Type Registration

Handling Multi-Interface Services

Constructor Selection for Dependency Resolution

Hybrid Registration: Mixing Manual and Automatic

Observing auto_dial's Behavior

Troubleshooting

Contributing

License

2. Balanced Control: `[ServiceLifetime]` Attribute (Recommended Default)

Observing `auto_dial`'s Behavior

2. Balanced Control: `[ServiceLifetime]` Attribute (Recommended Default)

Observing `auto_dial`'s Behavior